Outdoor installations

Premium carport - polycarbonate roof

Information, advice, studies and quotes, our sales team will assist you in your decision making process. With their modern and contemporary design, the carports in the Premium range are designed with a translucent alveolar polycarbonate roof to allow light to pass through.

Also available with a slate-coloured steel tray roof.

More details

Délais de fabrication :

Service client

02 31 78 82 76

Customer satisfaction is at the heart of our issues.

The shelters or carports are adapted to professionals, local authorities, administrations, industries but also to private individuals. Our sales team is at your disposal and will assist you in obtaining information, advice, studying your project and drawing up a personalised quote. Available for sale in standard sizes, do not hesitate to contact us for any request for a personalised project.

Made with a careful manufacturing process, the shelters in our range of carports are committed products. Indeed, our manufacturing policy aims at reducing waste and recycling our old products.

The Premium range of carports, shelters with a modern and contemporary design.

The carports respond to a whole range of problems, they are perfectly adapted in the following situations: for parking all types of vehicles, to protect pedestrian crossings and terraces from the wind, to shelter and store equipment and vehicles in an enclosed area. They are quick and easy to install by professionals and private individuals alike.

Dimensions :

Premium carports are available for sale in the following (overall) dimensions:

  • 3.558 m x 5.461 m x 2.839 m (width x length x height)
  • 3.558 m x 7.586 m x 3.355 m (width x length x height)
  • 3.558 m x 8.656 m x 3.355 m (width x length x height)

Structure :

As far as the structure is concerned, the carports are designed using ∅90 mm galvanised steel tubes on the inside and, on the outside, with a zinc weight of 275 g/m2 covered with an adhesion layer and polyester plasticisation, 90 micron thick. The tubes are drilled and fitted with inserts that are crimped directly in the factory to enable the various accessories required for installation to be fitted. The tubes are assembled using cast aluminium junction pieces. The plates are also made from this resistant alloy. They compensate for height and make up for false floor levelling.

Colours :

The shelters are available in different colours: green RAL 6005, white RAL 9010, anthracite grey RAL 7016. Other colours are available on request, do not hesitate to contact us.

Posts :

The number of posts needed to design your shelter depends on the final surface of its roof. Indeed, for a carport of less than 21 m2, only 4 posts will be necessary. On the other hand, for carports of more than 21 m2, you will need 6 posts on your shelter.

Roof :

The carports in the Premium range are designed with a translucent alveolar polycarbonate roof 10 mm thick. These plates slow down the passage of UV rays and thus increase the life of your vehicle's joints and its paintwork. This roof allows light to pass through, so it is possible to recharge your vehicles equipped with solar panels. Finally, the roof also lets satellite waves pass through for your camper van antennas. The roof plates are light and easy to install.

Steps :

Work resulting in the creation of a surface area of at least 20 m2 and at most 40 m2 requires a building permit if, after completion, the total surface area or right-of-way of the construction exceeds 150 m2.

You can also find this shelter in a steel tray finish: STANDARD CARPORT.

You will find the necessary documents on this sheet:

  •     Technical data sheet
  •     Site plan
  •     Assembly instructions

Necessary requirements for any order.

For any online order, you must imperatively return to us the General Conditions of Delivery and Installation completed and signed (table of general conditions of delivery + acknowledgement of receipt). As a reminder, unloading is strictly at the customer's expense and risk. We advise you to be at least 2 people due to the weight and length of the packages.

Nombre d'unités 1
assembly accessories Supplied
Hauteur 2,839 m ou 3,355 m
Longueur 5,461 m, 7,586 m, 8,656 m
Largeur 3,558 m
Matière Translucent polycarbonate roof
Poids 216kg, 367kg, 409kg
Coloris White RAL9010 Green RAL6005 Anthracite grey RAL7016

Your custom-made shelter

Please fill in the form and send it back to us with the dimensions of the shelter you want for a feasibility study by our sales team

Download (197.93k)

Accessoires

Découvrez aussi

Inscrivez-vous à la newsletter SPS Filets et soyez les premiers informés de nos offres spéciales, nouveautés et actualités !

customer reviews Merchant approved by Guaranteed Reviews Company, clic here to display attestation.